2102h Fieldbus Module Control Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols). Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication". Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
2102h Fieldbus Module Control Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols). Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication". Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols).
Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication".
Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
