2103h Fieldbus Module Status Function Shows the active fieldbuses. Object description Index 2103h Object name Fieldbus Module Status Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Fieldbus Module Disable Mask Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value Subindex 02h Name Fieldbus Module Enabled Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value Description Subindex 1 (Fieldbus Module Disable Mask): This subindex contains all physical interfaces and protocols that can be activated or deactivated. The set bit means that this fieldbus can be deactivated. Subindex 2 (Fieldbus Module Enabled): This subindex contains all currently activated physical interfaces and protocols. The set bit means that the fieldbus is active. The following distribution of the bits applies for subindices 1 and 2: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
2103h Fieldbus Module Status Function Shows the active fieldbuses. Object description Index 2103h Object name Fieldbus Module Status Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Fieldbus Module Disable Mask Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value Subindex 02h Name Fieldbus Module Enabled Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value Description Subindex 1 (Fieldbus Module Disable Mask): This subindex contains all physical interfaces and protocols that can be activated or deactivated. The set bit means that this fieldbus can be deactivated. Subindex 2 (Fieldbus Module Enabled): This subindex contains all currently activated physical interfaces and protocols. The set bit means that the fieldbus is active. The following distribution of the bits applies for subindices 1 and 2: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
Object description Index 2103h Object name Fieldbus Module Status Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1540 Change history
Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Fieldbus Module Disable Mask Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value Subindex 02h Name Fieldbus Module Enabled Data type UNSIGNED32 Access read only PDO mapping no Allowed values Preset value
Description Subindex 1 (Fieldbus Module Disable Mask): This subindex contains all physical interfaces and protocols that can be activated or deactivated. The set bit means that this fieldbus can be deactivated. Subindex 2 (Fieldbus Module Enabled): This subindex contains all currently activated physical interfaces and protocols. The set bit means that the fieldbus is active. The following distribution of the bits applies for subindices 1 and 2: USB Value = "1": The USB fieldbus (Modbus RTU) is available. RS-485 Value = "1": An RS-485 interface (Modbus RTU) is available. RS-232 Value = "1": An RS-232 interface (Modbus RTU) is available. CAN Value = "1": The CANopen fieldbus is available. E-NET Value = "1": An Ethernet interface (REST protocol) is available. E-CAT Value = "1": An EtherCAT interface is available. SPI Value = "1": An SPI interface (NanoSPI) is available. MTP Value = "1": A USB interface (MTP) is available. P-NET Value = "1": The PROFINET (PROFIdrive) fieldbus is available. MTCP Value = "1": The used protocol is Modbus TCP E-IP Value = "1": The used protocol is EtherNet/IP™
